Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 404 / 1488

redistribute
Syntax
The options available vary depending on the routing protocol context; that is, on
whether you are configuring BGP, DVMRP, IS-IS, OSPF, or RIP.
For BGP:
redistribute { fromProtocol | [ ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] ] } [ metric absoluteValue |
route-map mapTag | weight wtValue ]*
no redistribute { fromProtocol | [ ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] ] } [ metric [ absoluteValue ] |
route-map [ mapTag ] | weight [ wtValue ] ]*
For DVMRP:
[ no ] redistribute fromProtocol [ route-map mapTag ]
For IS-IS:
redistribute { fromProtocol | static ip |
[ ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] ] } [ level-1 | level-1-2 | level-2 |
metric
absoluteValue | metric-type { external | internal } |
route-map mapTag ]*
no redistribute { fromProtocol | static ip |
[ ospf match internal [ external [ 1 | 2 ] ] |
ospf match external [ 1 | 2 ] [ internal ] ] } [ level-1 | level-1-2 | level-2 |
metric [
absoluteValue ] | metric-type [ external | internal ] | route-map [ mapTag ]
]*
For OSPFv2:
redistribute { fromProtocol | ospf match internal }
[ metric-type { 1 | 2 } | metric absoluteValue | route-map mapTag | tag tagValue ]*
no redistribute { fromProtocol | ospf match internal }
[ metric-type [ 1 | 2 ] | metric [ absoluteValue ] | route-map [ mapTag ] |
tag [ tagValue ] ]*
redistribute ospf
{ match internal external [ 1 | 2 ] | match external [ 1 | 2 ] [ internal ] }
[ metric
absoluteValue | route-map mapTag | tag tagValue ]*
no redistribute ospf
{ match internal external [ 1 | 2 ] | match external [ 1 | 2 ] [ internal ] }
[ metric [
absoluteValue ] | route-map [ mapTag ] | tag [ tagValue ] ]*
For OSPFv3:
362 ■
redistribute
JUNOSe 11.1.x Command Reference Guide N to Z