Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 309 / 1488

privilege
Syntax
privilege mode [ all ] level levelValue commandPrefix
no privilege mode [ all ] [ level levelValue ] commandPrefix
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a privilege level to the specified command that appears in the specified mode.
The
no version sets the privilege level for the command to its default value and
displays the default privilege level in the show configuration output.
NOTE: You must access the CLI at privilege level 15 to view or use this command.
You cannot modify the privilege level of this command.
Options
■
mode —Mode in which the command appears; for example, User Exec mode,
Global Configuration mode, Router Configuration mode
■
all—Specifies that this command assigns the specified privilege level to all
commands in the specified mode and/or to all commands that match the specified
command prefix
■
levelValue —Level, in the range 0–15, at which you want the command to be
accessible
■
commandPrefix —Command prefix that you want to change; can be a partial
keyword, the starting keyword(s) of a command, or a complete command
Mode
Global Configuration
privilege
■ 267
Chapter 4: P Commands