Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 121 / 1488

next-interface
Syntax
[ no ] [ suspend ] next-interface interfaceType interfaceSpecifier
[ next-hop nextHop ] [ classifier-group claclName ] [ precedence precValue ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an output interface for an IP policy list. When the interfaceType is a broadcast
medium, specify a next hop using the next-hop command. The no version removes
a next interface rule from a policy list; the suspend keyword temporarily suspends
the rule; the no suspend version resumes application of a suspended rule. For IP
interfaces, this command is supported only on input policies.
NOTE: The next-interface command has been replaced by the forward interface
command and may be removed completely in a future release.
The SRP module Fast Ethernet port cannot be the destination of the next-interface
command.
Options
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
nextHop —Next-hop IP address
■
claclName —In Policy List Configuration, specifies the classifier control list used
to classify packets for this next-hop policy. If you do not specify a classifier group,
the router selects all packets from the interface associated with this policy list
for this rule.
■
precValue —In Policy List Configuration, specifies the precedence of this rule in
relation to other rules within this set
Mode
Classifier Group Configuration, Policy List Configuration
Related Topics
■
Policy Rule Precedence
next-interface
■ 79
Chapter 2: N Commands