Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1441 / 1488

vbr-rt
Syntax
vbr-rt pcr scr mbs
no vbr-rt
Release Information
Command introduced in JUNOSe Release 7.1.0.
ATM VC Class Configuration mode added in JUNOSe Release 7.3.0.
Description
In ATM VC Configuration mode, configures the variable bit rate, real time (VBR-RT)
service category on an ATM PVC. You must specify the peak cell rate (PCR), sustained
cell rate (SCR), and maximum burst size (MBS). The
vbr-rt command is valid only
for data PVCs; you cannot use this command for control (ILMI or signaling) PVCs.
The
no version restores the default service category, unspecified bit rate (UBR) without
a PCR.
In ATM VC Class Configuration mode, configures the VBR-RT service category as part
of a VC class definition that you assign to an ATM PVC. The
no version restores the
default service category, UBR without a PCR, in the VC class.
Options
pcr —Peak cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules) or
0–599040 (for OC12 ATM modules)
■
■
scr —Sustained cell rate, in Kbps, in the range 0–149760 (for OC3 ATM modules)
or 0–599040 (for OC12 ATM modules)
■
mbs —Maximum burst size, in cells, in the range 0–16777215
Mode
ATM VC Configuration, ATM VC Class Configuration
vbr-rt
■ 1399
Chapter 9: U, V, W, and Y Commands