Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 989 / 1488

show ipv6 tunnel-route
Syntax
show ipv6 tunnel-route [ vrf vrfName ] [ ipv6Address [ detail ] | ipv6Prefix [ detail ] ]
[ all ] [ protocol ] [ filter ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
vrf keyword and vrfName variable added in JUNOSe Release 7.2.0.
Description
Displays current state of the IPv6 tunnel routing table.
Options
■
vrfName —Name of the VRF
■
ipv6Address —IPv6 address
■
ipv6Prefix —Prefix of prefix list entry; in the format IPv6baseaddress / length ; for
example, 1::1/32
■
detail—Displays detailed information about the specific route
■
all—Displays all routes in the IPv6 tunnel routing table inserted from all protocols,
not just the best routes
■
protocol —The following protocols for which you want to display the best route
or all routes in the tunnel routing table; no routes are displayed if routes for the
specified protocol are not present in the tunnel routing table
NOTE: Other protocol options are available in the CLI, but they are not applicable to
the tunnel routing table.
■
bgp-tunnel—Displays the BGP tunnel routes in the tunnel routing table
■
filter —See Filtering show Commands on page 4
Mode
Privileged Exec, User Exec
show ipv6 tunnel-route
■ 947
Chapter 7: S Commands