Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 363 / 1488

radius include
Syntax
radius include attributeName
{ access-request | acct-on | acct-off | acct-start | acct-stop } { enable | disable }
no radius include attributeName
{ access-request | acct-on | acct-off | acct-start | acct-stop }
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2c-access-loop-parameters attribute added in JUNOSe Release 7.2.0.
l2cd attributes added in JUNOSe Release 9.0.0.
framed-interface-id and framed-ipv6-prefix attributes, and acct-stop support for
framed-ip-addr attribute added in JUNOSe Release 9.0.0.
downstream-calculated-qos-rate and upstream-calculated-qos-rate attributes
added in JUNOSe Release 9.1.0.
ipv6-accounting , delegated-ipv6-prefix , framed-ipv6-pool , framed-ipv6-route ,
ipv6-local-interface , ipv6-nd-ra-prefix , ipv6-primary-dns , ipv6-secondary-dns ,
and ipv6-virtual-router attributes added in JUNOSe Release 10.2.0.
icr-partition-id attribute added in JUNOSe Release 10.3.0.
Description
Configures the inclusion of RADIUS attributes in RADIUS messages. Not all attributes
are available in all message types. The listed attributes are included by default except
where noted. The
no version restores the default.
Options
attributeName —One of the following RADIUS attributes; not all attributes are
available in all message types.
■
Attributes available for Access-Request, Acct-Start, and Acct-Stop messages:
■
acct-multi-session-id—Includes RADIUS attribute 50, Acct-Multi-Session-Id
■
acct-tunnel-connection—Includes RADIUS attribute 68,
Acct-Tunnel-Connection
■
ascend-num-in-multilink—Includes RADIUS attribute 188,
Ascend-Num-In-Multilink
■
called-station-id—Includes RADIUS attribute 30, Called-Station-Id
■
calling-station-id—Includes RADIUS attribute 31, Calling-Station-Id
■
connect-info—Includes RADIUS attribute 77, Connect-Info
■
dhcp-options—Includes RADIUS attribute 26-55, DHCP-Options
■
dhcp-option-82—Includes RADIUS attribute 26–159, DHCP-Option 82
■
dhcp-gi-address—Includes RADIUS attribute 26-57, DHCP-GI-Address
■
dhcp-mac-address—Includes RADIUS attribute 26-56, DHCP-MAC Address
■
downstream-calculated-qos-rate—Includes RADIUS attribute 26-141,
Downstream-Calculated-Qos-Rate
radius include
■ 321
Chapter 6: R Commands