Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1432 / 1488

unknown-protocol
Syntax
unknown-protocol { permit | deny }
no unknown-protocol
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Modifies the subscriber policy for packets containing an unknown protocol to define
whether the subscriber (client) interfaces that belong to a bridge group or to a VPLS
instance forward (permit) or filter (deny) these packets. The
no version restores the
default value, permit unknown protocol packets.
You cannot change the default subscriber policy values for trunk (server) interfaces
that belong to a bridge group or to a VPLS instance. You also cannot change the
default subscriber policy values for a VPLS virtual core interface, which acts as a
trunk interface. The VPLS virtual core interface represents all of the MPLS tunnels
from the router to the remote VPLS edge (VE) devices.
Options
permit—Specifies that the subscriber interface associated with the bridge group
or VPLS instance forwards packets containing an unknown protocol
■
■
deny—Specifies that the subscriber interface associated with the bridge group
or VPLS instance filters packets containing an unknown protocol
Mode
Subscriber Policy Configuration
1390 ■
unknown-protocol
JUNOSe 11.1.x Command Reference Guide N to Z