Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1063 / 1488

show mpls tunnels
Syntax
show mpls [ traffic-eng ] tunnels [ name tunnelName ]
[ role { all | head | tail | middle | remote } | up | down ]
[ source-id
sourceAddress [ srcId ] ] [ destination destAddr ]
[ interface interfaceType interfaceSpecifier ] [ brief | count-only ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Displays status and configuration for all tunnels or for a specific tunnel in the current
router context.
Options
■
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
■
tunnelName —Name of tunnel or minor interface to be displayed
■
role—Displays tunnels in which the router has a specified role:
■
all—Displays all tunnels of which the router is a part
■
head—Displays tunnels where the router is the ingress router, or tunnel
headend
■
tail—Displays tunnels where router is the egress router, or tunnel tailend
(endpoint or destination of the tunnel)
■
middle—Displays tunnels where router is a transit router on the tunnel
■
remote—Displays tunnels where router is a transit router or egress router
(tailend)
■
up—Displays tunnels that are up
■
down—Displays tunnels that are down
■
sourceAddress —Source address of tunnels to be displayed
■
srcId —Local ID associated with source address of tunnels to be displayed, an
integer in the range 0–65535
■
destAddress —Destination address of tunnels to be displayed
■
interface—Displays information for the specified interface
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface
type; see Interface Types and Specifiers on page 5
■
brief—Displays only brief or summary information about the tunnels
■
count-only—Displays a count for entries that match the specified conditions
■
filter —See Filtering show Commands on page 4
show mpls tunnels
■ 1021
Chapter 7: S Commands