Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 677 / 1488

■
configuration—Displays the configuration of each controller at the specified level
and above
■
layerType —Type of SONET/SDH layer
■
section—Section layer of an interface
■
line—Line layer of an interface
■
path—SONET or SDH path
■
interval —Number of 15-minute intervals over which the router monitors
information; a value in the range 1–96; default value is the current interval,
number 1
■
controllerType —Type of interface or channel
■
tributary—SONET or SDH virtual tributary
■
e1—E1 channel over SDH virtual tributary
■
ds1—T1 channel over SONET/SDH virtual tributary
■
ds3—T3 over channelized SONET interface
■
t1—T1 channel on T3 over channelized SONET interface
■
total—Displays the MIB statistics for all intervals
■
delta—Displays baselined statistics for all intervals
■
all—Shows statistics for all time intervals, rather than statistics for selected time
intervals
■
filter —See Filtering show Commands on page 4
Mode
Privileged Exec, User Exec
show controllers sonet
■ 635
Chapter 7: S Commands