Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 488 / 1488

service
Syntax
service { empty-service-name action actionValue | serviceName [ action actionValue
] | unknown-service-name action actionValue }
no service { empty-service-name | serviceName | unknown-service-name }
Release Information
Command introduced before JUNOSe Release 7.1.0.
unknown-service-name keyword added in JUNOSe Release 10.1.0.
Description
Enables you to configure entries for the PPPoE service name table. PPPoE clients
use the entries in a PPPoE service name table to request that an AC, such as an E
Series router, support certain services. You can add three types of entries to a PPPoE
service name table: an empty service name, a custom service name (
serviceName ),
and an unknown service name. For empty service name and unknown service name
entries, use the
action keyword to specify that the AC either drop or terminate all
PADI requests from the PPPoE client. For custom entries, the action keyword is
optional. The default action for a custom entry is terminate . The no version removes
the specified service entry from the PPPoE service name table.
Options
■
empty-service-name—Specifies an empty service name entry of zero length,
indicating that any service is acceptable.
■
actionValue —One of the following actions for the empty service name entry,
custom service name entry, or the unknown service name entry:
■
drop—Directs the AC to ignore all PADI requests and not respond with a
PPPoE Active Discovery Offer (PADO) packet
■
terminate—Directs the AC to respond to a PADI request by sending a PADO
packet; this is the default action
■
serviceName —Name of a nonempty service name entry that specifies a custom
value, such as an ISP name or class of service; string of up to 31 alphanumeric
characters
■
unknown-service-name—Specifies a service that has not been configured in the
service name table. The default action for this service depends on the service
name table configuration. If all the services in the table are configured to
drop ,
the default action for the unknown service name entry is terminate . If all the
services are configured to terminate , the default action for the unknown service
name entry is drop . If both terminate and drop are configured, all unknown
service name entries are dropped by default.
Mode
PPPoE Service Name Table Configuration
446 ■
service
JUNOSe 11.1.x Command Reference Guide N to Z