Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 468 / 1488

schedule macro
Syntax
schedule macro { interval { frequency freqInMinutes | time-of-day dayTime
[day-of-week dayOfWeek | day-of-month dayOfMonth ] } | at atTime [ month day |
day month ] } fileName macroName [ macroArg ]*
no schedule macro [ fileName [ macroName ] ]
Release Information
Command introduced in JUNOSe Release 9.3.0.
Description
Schedules a macro to run once at a specific time, after a periodic interval, or at a
periodic time, such as time of day, day of the week or day of the month. In Global
Configuration mode, the setting persists on reboot, but in Privileged Exec mode, it
does not persist on reboot. Both methods support high availability. The
no version
unschedules the macro time to run.
Options
■
interval—Schedule a macro to run at a specified time once, after a periodic
interval, or at a periodic time of the day, day of the week, or day of the month
■
fileName —Name of the file on which to schedule a time to run
■
freqInMinutes —Interval start time start in minutes in which to schedule a macro
to run
■
dayTime —Interval time of day for a macro to run
■
dayOfWeek —Interval day of the week for a macro to run
■
dayOfMonth —Interval day of the month for a macro to run
■
atTime —Time at which to start a macro to run
■
macroName —Name of the interval macro file
■
macroArg —Name of the macro
Mode
Global Configuration, Privileged Exec
Related Topics
■
Scheduling Macros in the JUNOSe System Basics Configuration Guide
426 ■
schedule macro
JUNOSe 11.1.x Command Reference Guide N to Z