Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 67 / 1488

neighbor activate
Syntax
[ no | default ] neighbor { ipAddress | ipv6Address | peerGroupName } activate
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Specifies a peer or peer group with which routes of the current address family are
exchanged. A peer or peer group can be activated in more than one address family.
By default, a peer or peer group is activated only for the IPv4 unicast address family.
The address families that are actively exchanged over a BGP session are negotiated
when the session is established. This command takes effect immediately. The
no
version indicates that routes of the current address family should not be exchanged
with the peer or peer group. The
default version removes the explicit configuration
from the peer or peer group and reestablishes inheritance of the feature configuration.
Options
ipAddress —IP address of BGP neighbor
■
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
Mode
Address Family Configuration, Router Configuration
Related Topics
■
Configuring BGP Signaling for L2VPNs and Configuring BGP Signaling for VPLS in
the JUNOSe BGP and MPLS Configuration Guide
neighbor activate
■ 25
Chapter 2: N Commands