Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 440 / 1488

route-map
Syntax
Specifying a route map for DVMRP or RIP:
[ no ] route-map mapTag [ interfaceType interfaceSpecifier ]
Defining a route map:
[ no ] route-map mapTag [ permit | deny ] [ sequence ]
Defining a route map for data MDTs:
route-map routeMapName
no route-map
Release Information
Command introduced before JUNOSe Release 7.1.0.
IP PIM Data MDT Configuration mode added in JUNOSe Release 8.2.0.
Description
Specifies a route map for DVMRP, RIP, or data MDTs, or defines the conditions for
applying routing policies to filter or modify routes redistributed into or propagated
by a routing protocol. The
no version deletes the route map.
Options
■
mapTag —String of up to 32 alphanumeric characters.
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
mapTag —String of up to 32 alphanumeric characters. The redistribute Router
Configuration command uses this string to reference this route map. Multiple
route maps may share the same map tag.
■
permit—If the match criteria are met for this route map and permit is specified,
the route is redistributed as controlled by the set actions.
■
deny—If the match criteria are met for the route map and deny is specified, the
route is not redistributed, and no further route maps sharing the same map tag
are examined.
■
sequence —Number, in the range 0–65535, that indicates the position a new
route map is to have in the list of route maps already configured with the same
map tag. If given with the
no version of this command, it specifies the position
of the route map that should be deleted.
Mode
Address Family Configuration (RIP), Global Configuration, IP PIM Data MDT
Configuration
398 ■
route-map
JUNOSe 11.1.x Command Reference Guide N to Z