Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 341 / 1488

qos-shaping-mode
Syntax
[ no ] qos-shaping-mode [ cell | frame ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies either cell-based or frame-based traffic shaping for ATM, Gigabit Ethernet,
or 10-Gigabit Ethernet interfaces. The shaping mode is configured for a major interface
and affects scheduling for all nodes and queues stacked above the interface. In cell
shaping mode, queues and nodes are scheduled as if they were ATM cells. All newly
configured ports use the shaping mode from port 0; frame is the default shaping
mode for port 0. If you do not specify an option, the command restores the default,
frame. The
no version restores the default, frame.
Options
cell—Shapes traffic based on the number of bytes in a cell, and accounts for
ATM cell encapsulation and padding overhead
■
■
frame—Shapes traffic based on the number of bytes in a frame, without
considering cell encapsulation and padding overhead; the default shaping mode
for port 0
Mode
Interface Configuration
Related Topics
Configuring the QoS Shaping Mode for ATM Interfaces
■
■
Configuring the QoS Shaping Mode for Ethernet Interfaces
qos-shaping-mode
■ 299
Chapter 5: Q Commands