Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1226 / 1488

snmp-server enable traps
Syntax
To enable and configure trap severity level on a global basis:
[ no ] snmp-server enable traps [ trapCategory | snmp authentication ]
[ trapfilters trapFilter ]
To specify the trap severity level on a per-category basis:
snmp-server enable traps { trapCategory | snmp authentication }
per-category-trapFilters trapFilter
Release Information
Command introduced before JUNOSe Release 7.1.0.
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.
per-category-trapFilters keyword added in JUNOSe Release 9.3.0.
Description
Enables and configures global and category-level SNMP trap generation. The no
version disables SNMP trap generation globally. There is no no version for the
command to specify the trap severity level on a per-category basis.
Options
trapCategory —SNMP trap category
■
■
addrPool—Local address pool traps
■
atmPing—E Series router proprietary ATM ping traps
■
bfdmib—BFD MIB traps
■
bgp—BGP state change traps
■
bulkstats—Bulkstats file full and nearly full traps
■
cliSecurityAlert—Security alerts traps
■
dhcp—DHCP traps
■
dismanEvent—Distributed management (disman) event traps
■
dosProtectionPlatform—DoS protection platform traps
■
dvmrp—DVMRP traps
■
dvmrpProp—E Series router proprietary DVMRP traps
■
environment—Power, temperature, fan, and memory utilization traps
■
fileXfer—File transfer status change traps
■
haRedundancy—High availability and redundancy traps
■
inventory—Router inventory and status traps
■
ip—Internet Protocol traps
1184 ■
snmp-server enable traps
JUNOSe 11.1.x Command Reference Guide N to Z