Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 328 / 1488

pvc
Syntax
To create a control PVC from Interface Configuration mode:
pvc vcd vpi / vci ilmi
no pvc vcd
To create a data PVC from Subinterface Configuration mode and access ATM VC
Configuration mode:
pvc vcd vpi / vci
no pvc vcd
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
From Interface Configuration mode, creates a control PVC that supports ILMI services.
To create a control PVC, you must specify the VCD, VPI, VCI, and the
ilmi
encapsulation type. The no version removes the specified control PVC from the
router.
From Subinterface Configuration mode, creates a data PVC and accesses ATM VC
Configuration mode, from which you can configure and modify individual PVC
attributes one at a time. To create a data PVC, you must specify the VCD, VPI, and
VCI. The
no version removes the specified data PVC from the router.
Options
■
vcd —Virtual circuit descriptor that is an identifier for the VC in other commands;
number, in the range 1–2147483647
■
vpi —Virtual path identifier for this PVC. The numeric range depends on the
module capabilities and current configuration.
■
vci —Virtual circuit identifier for this PVC. The numeric range depends on the
module capabilities and current configuration. For control PVCs, the
recommended VCI value is 16 for
ilmi encapsulation and 5 for qsaal
encapsulation. The VCI value cannot be 0.
■
ilmi—Configures Integrated Local Management Interface encapsulation for a
control PVC
Mode
Interface Configuration, Subinterface Configuration
286 ■
pvc
JUNOSe 11.1.x Command Reference Guide N to Z