Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1337 / 1488

■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
■
fields—Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
■
fieldOptions —Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
■
all—All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
■
afi—Address family identifier
■
aggregator—AS number and IP address of aggregator
■
as-path—AS path through which this route bas been advertised
■
atomic-aggregate—Whether the atomic aggregate attribute is present
■
best—Whether this is the best route for the prefix
■
clusters—List of cluster IDs through which the route has been advertised
■
communities—Community number associated with the route
■
extended-communities—Extended community
■
imported—Whether the route was imported
■
intro—Introductory information about the state of various BGP attributes;
this information is displayed only if you specify this keyword
■
in-label—MPLS label for the route; the label received with incoming MPLS
frames; typically, but not always, this is the label advertised to MP-BGP peers
■
loc-pref—Local preference for the route
■
med—Multiexit discriminator for the route
■
next-hop—IP address of the next router that is used when forwarding a
packet to the destination network
■
next-hop-cost—Whether the indirect next hop of the route is unreachable,
if not, displays IGP cost to the indirect next hop
■
origin—Origin of the route
■
originator-id—Router ID of the router in the local AS that originated the route
■
out-label—MPLS label for the route; the label sent with outgoing MPLS frames;
also the label received from MP-BGP peer; typically, but not always, this is
the label received from MP-BGP peers
■
peer—IP address of BGP peer from which route was learned
test bgp ipv6 neighbor
■ 1295
Chapter 8: T Commands