Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 77 / 1488

neighbor default-originate
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
[ route-map mapTag ]
{ no | default } neighbor { ipAddress | ipv6Address | peerGroupName } default-originate
[ route-map [ mapTag ] ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Allows a BGP speaker (the local router) to send the default route 0.0.0.0/0 to a
neighbor for use as a default route. When you issue this command in the route-target
address family, BGP advertises the Default-RT-MEM-NLRI route (0:0:0/0). The
no
version halts sending a default route to the neighbor. The default version removes
the explicit configuration from the peer or peer group and reestablishes inheritance
of the feature configuration.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command. You cannot override the
characteristic for a specific member of the peer group.
■
mapTag —Name of route map applied to modify the attributes of the default route
or to filter the default route; string of up to 32 characters
Mode
Address Family Configuration, Router Configuration
neighbor default-originate
■ 35
Chapter 2: N Commands