Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 747 / 1488

show ip bgp
Syntax
To display information about networks for all address families or for a specific address
family other than the L2VPN address family and the route-target address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
[ network [ networkMask [ longer-prefixes ] ] ] [ fields fieldOptions ] [ filter ]
To display information for networks associated with only the L2VPN address family:
show ip bgp { l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName }
[ site-id siteId block-offset blockOffset ] [ fields fieldOptions ] [ filter ]
To display information for networks associated with only the route-target address
family:
show ip bgp route-target signaling rtfPrefix [ longer-prefixes ]
[ fields fieldOptions ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
site-id keyword and siteId variable added in JUNOSe Release 7.1.0.
block-offset keyword and blockOffset variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 8.2.0.
rtMemNlri variable replaced by rtfPrefix variable in JUNOSe Release 9.1.0.
Description
Displays filtered information about a specified network, or all networks, in the BGP
routing table associated with a specified address family or all address families. Only
those fields that you specify are displayed, except that the prefix field is always
displayed. Default fields can be set with the
default-fields route command.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
network —IP address for which the best matching route is displayed; if no network
is specified, displays the fields for all networks
■
networkMask —Address mask to be applied to the network address
■
longer-prefixes—Displays all routes with a prefix that is equal to or more specific
than the specified prefix
show ip bgp
■ 705
Chapter 7: S Commands