Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 425 / 1488

rename
Syntax
rename [ sourcePath ] sourceFilename [ destinationPath ] destinationFilename
Release Information
Command introduced before JUNOSe Release 7.1.0.
hostName and deviceName variables added in JUNOSe Release 7.2.0.
Description
Renames a local file. There is no no version.
NOTE: You cannot change the extension of a file, for example, from .mac to .scr.
See Renaming Files in the JUNOSe System Basics Configuration Guide for detailed
information on file type usage with the rename command.
Options
sourcePath —Path to the source in the format:
hostName : | deviceName : | /incoming/ subdirectory / | /outgoing/ subdirectory /
■
■
hostName :—Name of the network host
■
deviceName :—Name of the device specifying a flash card slot
■
disk0—Specifies flash card slot 0 on the primary SRP module; if no device
is specified for the primary SRP module, then disk0 is used
■
disk1—Specifies flash card slot 1 on the primary SRP module; source and
destination file types must be .dmp; supported only on the E120 router and
the E320 router
■
standby—Specifies flash card slot 0 on the standby SRP module for backward
compatibility
■
standby-disk0—Specifies flash card slot 0 on the standby SRP module
■
standby-disk1—Specifies flash card slot 1 on the standby SRP module; source
and destination file types must be .dmp; supported only on E120 and E320
routers
■
incoming—Specifies the router’s incoming FTP directory
■
subdirectory —Name of a subdirectory on the router’s FTP server. If the
subdirectory does not exist, the router creates it.
■
outgoing—Specifies the router’s outgoing FTP directory
■
sourceFileName —File to rename
■
destinationPath —Path to the destination in the format:
networkPath | /incoming/ subdirectory | /outgoing/ subdirectory
■
networkPath —Path to the network host
■
incoming—Specifies the incoming router’s FTP directory
rename
■ 383
Chapter 6: R Commands