Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1016 / 1488

show l2tp tunnel
Syntax
show l2tp tunnel [ detail ] [ state { adminState | ifOperStatus |
failover-resync failoverResyncMode } ]
[ l2tpName | [ virtual-router vrName ] ip ipAddress [ l2tpNameNoDest ] ] [ filter ]
To display summary information:
show l2tp tunnel summary [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
failover-resync keyword and failoverResyncMode variable added in JUNOSe
Release 9.0.0.
Description
Displays detailed information about the configured and operational status of selected
L2TP tunnels or summary information for all L2TP tunnels.
Options
■
detail—Provides complete information about the specified sessions, including
the L2TP host profile name
■
adminState —Displays information about tunnels only with the specified effective
administrative state
■
enabled—Effective administrative state is disabled
■
disabled—Effective administrative state is enabled
■
drain—Effective administrative state is drain
■
ifOperStatus —Displays information about tunnels only with the specified
operational state
■
up—Operational state is up
■
down—Operational state is down
■
lower-down— Operational state is lower down
■
not-present—Operational state is not-present
■
failoverResyncMode —Displays information about tunnels that use the specified
failover resynchronization mode:
■
disable—Peer failover resynchronization is disabled
■
failover-protocol—Uses the L2TP failover protocol method
■
failover-protocol-fallback-to-silent-failover—Uses the L2TP failover protocol
method; however, if the peer does not support this method, the silent failover
method is used
974 ■
show l2tp tunnel
JUNOSe 11.1.x Command Reference Guide N to Z