Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1049 / 1488

show mpls forwarding
Syntax
show mpls forwarding
[ interface
interfaceType interfaceSpecifier ] [ bgp | ldp | rsvp-te ]
[ label { atm vpi vci | labelNumber [ labelRangeEnd ] } ]
[ brief | bindings | bindings delta | delta ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Displays the MPLS forwarding table.
Options
■
interfaceType —Interface type; see Interface Types and Specifiers on page 5
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
bgp—Displays BGP-specific forwarding information
■
ldp—Displays LDP-specific forwarding information
■
rsvp-te—Displays RSVP-TE–specific forwarding information
■
atm—Displays information for the specified ATM VPI/VCI labels
■
vpi —Specifies ATM VPI that partially designates a label
■
vci —Specifies ATM VCI that partially designates a label
■
labelNumber —Label number, in the range 16–1048575
■
labelRangeEnd —Number, in the range 16–1048575, that specifies the high end
of a range of labels
■
brief—Displays only brief or summary information about the tunnels
■
bindings—Displays protocol-specific label-to-FEC bindings
■
detail—Displays detailed information
■
filter —See Filtering show Commands on page 4
Mode
Privileged Exec, User Exec
Related Topics
■
Monitoring LDP-Related Settings for VPLS , Monitoring MPLS Forwarding for Layer
2 Services over MPLS , and Monitoring MPLS Forwarding State for L2VPN (VPWS)
Instances in the JUNOSe BGP and MPLS Configuration Guide
show mpls forwarding
■ 1007
Chapter 7: S Commands