Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 768 / 1488

show ip bgp flap-statistics
Syntax
To display information about dampened routes for address families other than the
L2VPN and route-target signaling address families:
show ip bgp
[ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf
vrfName ] flap-statistics
[ network [ networkMask ] ] [ filter ]
To display information about dampened routes for only the route-target signaling
address family:
show ip bgp route-target signaling flap-statistics [ rtfPrefix | rtfAddress ] [ filter ]
To display information about dampened routes for only the L2VPN address family:
show ip bgp
{ l2vpn all | l2vpn vpls
vplsName | l2vpn vpws vpwsName } flap-statistics
[ site-id siteId block-offset blockOffset ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
site-id keyword and siteId variable added in JUNOSe Release 7.1.0.
block-offset keyword and blockOffset variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords and rtMemNlri variable added in JUNOSe
Release 8.2.0.
rtMemNlri variable replaced by two variables, rtfAddress and rtfPrefix , in JUNOSe
Release 9.1.0.
Description
Displays information about routes that are dampened.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
network —IP address of the network for which you want information displayed;
if no network is specified, the fields are displayed for all networks
■
networkMask —Address mask to be applied to the network address
■
route-target signaling—Displays information for only the route-target address
family
726 ■
show ip bgp flap-statistics
JUNOSe 11.1.x Command Reference Guide N to Z