Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 208 / 1488

path ds3 t1 description
Syntax
path pathChannel ds3 ds3Channel t1 t1Channel [ / subchannel ] description name
no path pathChannel ds3 ds3Channel t1 t1Channel [ / subchannel ] description name
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Assigns a text description or an alias to a T1 channel group or subchannel on a DS3
signal. This command applies to a T1 channel group or subchannel on a DS3 over
channelized SONET/SDH interface. Use the
show controllers sonet command to
display the text description. The no version removes the description or alias.
Options
■
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
ds3Channel —Number, in the range 1–3, that identifies the DS3 channel
■
t1Channel —One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
■
subchannel —Fractional T1 interface in the range 1–24
■
name —Text string or alias of up to 80 characters for the T1 channel group or
subchannel on a T3 over channelized SONET/SDH interface
Mode
Controller Configuration
166 ■
path ds3 t1 description
JUNOSe 11.1.x Command Reference Guide N to Z