Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 194 / 1488

path ds3 bert
Syntax
path pathChannel ds3 ds3Channel bert pattern pattern interval time
no path pathChannel ds3 ds3Channel bert
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Enables bit error rate tests using the specified pattern for a DS3 signal. This command
applies to a DS3 over channelized SONET interface. The
no version stops the test
that is running.
Options
■
pathChannel —Number, in the range 1–2147483648, that identifies the path
■
ds3Channel —Number, in the range 1–3, that identifies the DS3 channel
■
pattern —One of the following test patterns:
■
0s—Repetitive test pattern of all zeros, 00000...
■
1s—Repetitive test pattern of all ones, 11111...
■
2^9—Pseudorandom test pattern, 511 bits long
■
2^11—Pseudorandom test pattern, 2047 bits long
■
2^15—Pseudorandom test pattern, 32,767 bits long
■
2^20—Pseudorandom test pattern, 1,048,575 bits long
■
2^20-QRSS—Pseudorandom QRSS test pattern, 1,048,575 bits long
■
2^23—Pseudorandom test pattern, 8,388,607 bits long
■
alt-0-1—Repetitive alternating test pattern of zeros and ones, 01010101...
■
time —Duration of the test, in the range 1–1440 minutes
Mode
Controller Configuration
152 ■
path ds3 bert
JUNOSe 11.1.x Command Reference Guide N to Z