Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 765 / 1488

show ip bgp filter-list
Syntax
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn all | l2vpn vpls vplsName | l2vpn vpws vpwsName | route-target signaling ]
filter-list asPathAccessListName [ fields fieldOptions ] [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
l2vpn and all keywords added in JUNOSe Release 7.1.0.
vpls keyword and vplsName variable added in JUNOSe Release 7.1.0.
vpws keyword and vpwsName variable added in JUNOSe Release 8.1.0.
route-target signaling keywords added in JUNOSe Release 8.2.0.
Description
Displays all routes whose AS path matches the specified AS path access list.
Options
■
ipv4 unicast—Specifies the IPv4 unicast address family and routing table; the
default option
■
ipv4 multicast—Specifies the IPv4 multicast address family and routing table
■
vpnv4 all—Specifies the IPv4 VPN address family and all IPv4 VPN routing and
forwarding instances
■
vpvn4 vrf vrfName —Specifies the IPv4 VPN address family and only the IPv4
VPN routing and forwarding instance with the name vrfName
■
l2vpn all—Specifies all VPLS and VPWS instances in the L2VPN address family
■
l2vpn vpls vplsName —Specifies the VPLS instance with the name vplsName
■
l2vpn vpws vpwsName —Specifies the VPWS instance with the name vpwsName
■
route-target signaling—Displays information for only the route-target address
family
■
asPathAccessListName —Name of AS path access list to filter routes; displays only
routes that have AS paths matching the specified list
■
fields—Displays only the specified fields; the display order of the fields is
hard-coded and not affected by the order in which you enter them
■
fieldOptions —Fields to be displayed, in the format
all | [ afi | aggregator | as-path | atomic-aggregate | best | clusters | communities
| extended-communities | imported | intro | in-label | loc-pref | med | next-hop
| next-hop-cost | origin | originator-id | out-label | peer | peer-type | rd | safi |
stale | unknown-types | weight ]*
■
all—All available information; not recommended, because this information
for each network does not fit on a single line and is difficult to read
■
afi—Address family identifier
■
aggregator—AS number and IP address of aggregator
■
as-path—AS path through which this route bas been advertised
■
atomic-aggregate—Whether the atomic aggregate attribute is present
show ip bgp filter-list
■ 723
Chapter 7: S Commands