Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1423 / 1488

undebug ip mbgp
Syntax
undebug ip mbgp [ in | out ] [ peerAddress [ peerAddressMask ] ]
[ bgpLog ] [ router routerName ] [ filtering-router filteringRouterName ]
[ accessClassName ] [ route-map mapName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Turns off the display of information previously enabled with the debug ip mbgp
command. There is no no version.
Options
■
in—Displays information for inbound events
■
out—Displays information for outbound events
■
peerAddress —IP address of BGP peer for which information is displayed
■
peerAddressMask —Network mask of BGP peer for which information is displayed
■
bgpLog —BGP log of interest; one of the following options:
■
dampening—BGP dampening event; route is suppressed or no longer
suppressed by route-flap dampening
■
events—BGP finite state machine events and transitions
■
keepalives—BGP keepalive message events
■
next-hops—BGP next hop events
■
updates—BGP routing table update events
■
routerName —Name of the virtual router that owns the BGP router for which
information is being displayed
■
filteringRouterName —Name of the virtual router that owns the access class and
route map parameters
■
accessClassName —Name of an access list to filter output
■
mapName —Name of a route map to filter output
Mode
Privileged Exec
undebug ip mbgp
■ 1381
Chapter 9: U, V, W, and Y Commands