Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 99 / 1488

neighbor remote-as
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } remote-as number
no neighbor { ipAddress | ipv6Address } [ remote-as [ number ] ]
no neighbor peerGroupName remote-as [ number ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Adds an entry to the BGP neighbor table. Specifying a neighbor with an AS number
that matches the AS number specified in the
router bgp command identifies the
neighbor as internal to the local AS. Otherwise, the neighbor is considered external.
This command takes effect immediately. The
no version removes an entry from the
table.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
number —Number in the range 1–4294967295; the AS to which the neighbor
belongs
Mode
Address Family Configuration, Router Configuration
Related Topics
■
Configuring BGP Signaling for L2VPNs and Configuring BGP Signaling for VPLS in
the JUNOSe BGP and MPLS Configuration Guide
neighbor remote-as
■ 57
Chapter 2: N Commands