Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 276 / 1488

ppp multilink multiclass traffic-class
Syntax
[ no ] ppp multilink multiclass traffic-class best-effort [ trafficClassName ]*
Release Information
Command introduced in JUNOSe Release 11.1.0.
Description
Configures mapping of QoS traffic classes to multilink classes. The no version deletes
the mapping of QoS traffic classes to multilink classes.
Options
best-effort—Specifies best-effort as the default traffic class for the router. The
best-effort traffic class forwards as many packets as possible in as reasonable a
■
time as possible. The best-effort traffic class is mapped to multilink class 0 by
default. You must specify the best-effort traffic class in the command or the
command fails.
■
trafficClassName —Name of a QoS traffic class. You can map up to eight traffic
classes to multilink classes. The order of the traffic class names specified
determines the multilink class number which is used for the traffic class; for
example, trafficClassName1 corresponds to multilink class 1, trafficClassName2
corresponds to multilink class 2, and so on.
■
* —Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Interface Configuration, Profile Configuration, Subinterface Configuration
Related Topics
Configuring Multiclass MLPPP
■
■
Configuring Traffic Classes on Multiclass MLPPP Interfaces
234 ■
ppp multilink multiclass traffic-class
JUNOSe 11.1.x Command Reference Guide N to Z