Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1210 / 1488

show vlan subinterface
Syntax
show vlan subinterface [ interfaceType interfaceSpecifier ] [ mac-address ] [ filter ]
To display summary information:
show vlan subinterface summary
To display by VLAN ID or S-VLAN ID:
show vlan subinterface { svlan s-vlanIdValue | vlan } { vlanIdValue | any }
[ mac-address ] [ filter ]
To display VLAN subinterfaces that are created based on agent-circuit-identifier
information:
show vlan subinterface [ interfaceType interfaceSpecifier | svlan s-vlanIdValue ]
agent-circuit-identifier [ filter ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
s-vlan keyword and s-vlanIdValue variable added in JUNOSe Release 7.1.0.
vlan keyword and vlanIdValue variable added in JUNOSe Release 7.1.0.
any and mac-address keywords added in JUNOSe Release 7.1.0.
agent-circuit-identifier keyword added in JUNOSe Release 7.3.0.
Description
Displays configuration and status information for a specified VLAN subinterface or
for all VLAN subinterfaces configured on the router. Alternatively, you can use the
summary keyword to display only brief summary information for all VLAN interfaces.
You can also display information about the VLAN IDs or S-VLAN IDs for the specified
VLAN subinterface.
Options
interfaceType —One of the following interface types listed in “Interface Types
and Specifiers” on page 5 :
■
■
atm
■
fastEthernet
■
gigabitEthernet
■
lag
■
tenGigabitEthernet
■
interfaceSpecifier —Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
mac-address—Displays VLAN subinterfaces configured with unique MAC
addresses
■
filter —See Filtering show Commands on page 4
1168 ■
show vlan subinterface
JUNOSe 11.1.x Command Reference Guide N to Z