Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1401 / 1488

tunnel mpls path-option
Syntax
tunnel mpls [ traffic-eng ] path-option number
{ dynamic | explicit { name pathName | identifier idNumber } }
[ hop-by-hop | ospf | isis ] [ lockdown ]
no tunnel mpls [ traffic-eng ] path-option number
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies the path options for a tunnel. You can configure one or more path
options—each identified by a unique number—for a given tunnel. The path option
number expresses the preference for that option; lower numbers have a higher
preference, with 1 having the highest preference. The
no version deletes the path
options.
Options
■
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
■
number —Identifier for a set of path options
■
dynamic—Specifies that the path is dynamically calculated
■
explicit—Specifies that an explicit path is used
■
pathName —Name of the explicit path; string of up to 20 characters
■
idNumber —Number identifying the explicit path; in the range 1–65535
■
hop-by-hop—Specifies that hop-by-hop routing is used for this path option
■
ospf—Specifies that OSPF routing is used for this path option
■
isis—Specifies that IS-IS routing is used for this path option
■
lockdown—Specifies that optimization is not done for this path option
Mode
Interface Configuration, Tunnel Profile Configuration
tunnel mpls path-option
■ 1359
Chapter 8: T Commands