Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1397 / 1488

tunnel mpls diff-serv phb-id
Syntax
tunnel mpls diff-serv phb-id { private privateId | standard standardId } [ exp-bits
expBits ]
no tunnel mpls diff-serv phb-id { private privateId | standard standardId }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Specifies the PHB supported by a signaled tunnel.
For E-LSPs, this command also maps the PHB to the specified EXP bits bitValue . You
can repeat the command for up to eight PHB mappings.
For L-LSPs, the exp-bits keyword is not used. If you repeat the command, the most
recent command overwrites the previous command.
The no version removes the mapping association.
Options
privateId —Number, in the range 0–4095, designating the private PHB identifier
■
■
standardId —Number, in the range 0–63, designating the standard identifier using
the DSCP bits
■
expBits —Number, in the range 0–7, designating the EXP bits
Mode
Interface Configuration, Tunnel Profile Configuration
tunnel mpls diff-serv phb-id
■ 1355
Chapter 8: T Commands