Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1299 / 1488

t1 fdl string
Syntax
t1 channel fdl string { eic eicValue | fic ficValue | lic licValue | unit unitValue |
pfi pfiValue | port portValue | generator generatorValue }
no t1 channel fdl string { eic | fic | lic | unit | pfi | port | generator }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an FDL message on a T1 channel on a CT3 interface as defined in the ANSI
T1.403 specification. Currently, FDL strings can be configured only locally. The
no
version restores the default value to the specified FDL message or to all FDL messages.
Options
■
channel —One or more individual T1 channels, ranges of T1 channels, or
combination of individual channels and ranges, in the range 1–28 (no spaces);
for example, 3,7-15,19-13,27
■
eicValue —Equipment identification code; 1–10 characters; default value is the
null value
■
ficValue —Frame identification code; 1–10 characters; default value is the null
value
■
licValue —Line identification code; 1–10 characters; default value is the null value
■
unitValue —Unit identification code; 1–6 characters; default value is the null value.
■
pfiValue —Facility identification code to send in the FDL path message; 1–38
characters; default value is the null value.
■
portValue —Equipment port number to send in the FDL idle signal message; 1–38
characters; default value is the null value.
■
generatorValue —Generator number to send in the FDL test signal message; 1–38
characters; default value is the null value.
Mode
Controller Configuration
t1 fdl string
■ 1257
Chapter 8: T Commands