Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1227 / 1488

■
ldp—LDP traps
■
link—SNMP linkUp and linkDown traps
■
log—System log capacity traps
■
mobileIpv4—Mobile IPv4 traps
■
mplste—Mplste traps
■
mrouter—Mrouter traps
■
ntp—E Series router proprietary traps
■
ospf—OSPF traps
■
packetMirror—Secure packet mirroring traps; visible only if packet mirroring
is enabled
■
pim—PIM traps
■
ping—Ping operation traps (in disman remops MIB)
■
radius—RADIUS authentication and authorization servers
■
routeTable—Maximum route limit and warning threshold traps; when this
trap is generated, the actual value of the exceeded warning threshold is
displayed
■
sonet—SONET traps
■
snmp—SNMP coldStart, warmStart, link, and authenticationFailure traps
■
traceroute—Traceroute operation traps (in disman remops MIB)
■
vrrp—VRRP traps
■
snmp—Specifies the SNMP coldStart, warmStart, and authenticationFailure traps
■
authentication—Specifies the SNMP authenticationFailure trap
■
trapFilters —Specifies the trap severity level at a global level; if the per-category
trap severity level is not set for a particular category, this setting is applied to
that category
■
trapFilter —Minimum severity level for filtering traps at a global level or for a
specified category
■
emergency—Severity level 0
■
alert—Severity level 1
■
critical—Severity level 2
■
error—Severity level 3
■
warning—Severity level 4
■
notice—Severity level 5
snmp-server enable traps
■ 1185
Chapter 7: S Commands