Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 71 / 1488

neighbor allowas-in
Syntax
neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in number
no neighbor { ipAddress | ipv6Address | peerGroupName } allowas-in [ number ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
Description
Specifies the number of times that the AS path of a received route may contain the
recipient BGP speaker’s AS number and still be accepted. The
no version restores
the default state, which is to reject as a loop any route whose path contains the
speaker’s AS number. IBGP peers in the VPNv4 address family always accept these
routes, regardless of the command configuration.
Options
■
ipAddress —IP address of BGP neighbor
■
ipv6Address —IPv6 address of BGP neighbor
■
peerGroupName —Name of a BGP peer group. If you specify a BGP peer group
by using the peerGroupName argument, all the members of the peer group inherit
the characteristic configured with this command, unless it is overridden for a
specific peer.
■
number —Number in the range 1–10
Mode
Router Configuration
neighbor allowas-in
■ 29
Chapter 2: N Commands