Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1457 / 1488

vlan policy
Syntax
vlan policy { input | output } policyName
[ statistics { enabled [ baseline { enabled | disabled } ] [ preserve | merge ] |
disabled [ merge ] } | merge ]
no vlan policy { input | output } [ policyName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
merge keyword added in JUNOSe Release 7.2.0.
Profile Configuration mode added in JUNOSe Release 7.2.0.
Description
Assigns a VLAN policy list to an interface. If you enter the vlan policy command and
the policy list does not exist, the router creates a policy list with no rules, the default.
When no rules are found in a policy list, the router performs a routing table lookup
and forwards packets on the interface based on the routing table information. You
must specify the
input or output keyword to assign the policy list to the ingress or
egress of the interface.
In Profile Configuration mode, assigns the policy list to a profile, which then assigns
the policy to an interface.
In Interface Configuration mode, the no version removes the association between a
policy list and an interface. In Profile Configuration mode, the no version removes
the policy reference from the profile.
Options
■
input—Applies policy to data arriving at this interface
■
output—Applies policy to data leaving this interface
■
policyName —Name of the policy; a maximum of 40 characters
■
statistics—Enables or disables collection of policy routing statistics
■
enabled—Enables collection of policy routing statistics
■
baseline enabled—Enables baselining of policy routing statistics
■
baseline disabled—Disables baselining of policy routing statistics
■
preserve—Preserves existing statistics for any classifier list that is the same
for both the new and old policy attachments when you attach a new policy
to an interface
■
disabled—Disables collection of policy routing statistics
■
merge—Enables merging of multiple policies to form a single policy
Mode
Interface Configuration, Profile Configuration
Related Topics
■
Setting a Statistics Baseline for Policies
vlan policy
■ 1415
Chapter 9: U, V, W, and Y Commands