Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010, Справочник по командам

Страница: 1230 / 1488

snmp-server host
Syntax
To specify the SNMP version, community, UDP port, trap category and trap severity:
snmp-server host ipAddress [ version ver ] securityString [ udp-port port ]
[ trapCategory ]* [ trapFilters trapFilter ]
no snmp-server host ipAddress
To specify the ping timeout and trap queue:
snmp-server host ipAddress pingTimeOut timeOutValue
[ trapQueue { drainRate queueDrainRate | full queueFull |
size queueSize }
[ drainRate queueDrainRate | full queueFull | size queueSize ]*]
snmp-server host ipAddress trapQueue
{ drainRate queueDrainRate | full queueFull | size queueSize }
[ drainRate queueDrainRate | full queueFull | size queueSize ]*
[ pingTimeOut timeOutValue ]
no snmp-server host ipAddress { pingTimeOut | trapQueue { drainRate | full | size
} }
Release Information
Command introduced before JUNOSe Release 7.1.0.
ip keyword added in JUNOSe Release 7.1.0.
packetMirror keyword added in JUNOSe Release 7.2.0.
Description
Configures one or more hosts to receive an SNMP trap. The no version removes the
specified host from the list of recipients.
Options
■
ipAddress —IP address of the SNMP trap recipient
■
ver —SNMP protocol version for traps sent to host; one of the following values:
v1, v2c, or v3
■
securityString —SNMP community string
■
port —UDP port number of SNMP trap recipient
■
trapCategory —SNMP trap category
■
addrPool—Local address pool traps
■
atmPing—E Series router proprietary ATM ping traps
■
bfdmib—BFD MIB traps
■
bgp—BGP state change traps
■
bulkstats—Bulkstats file full and nearly full traps
■
cliSecurityAlert—Security alerts traps
1188 ■
snmp-server host
JUNOSe 11.1.x Command Reference Guide N to Z