Jetter JC-120MC, Руководство пользователя

Страница: 125 / 634

Jetter AG 125
JC-120MC Initial commissioning
5 Initial commissioning
The first part of this chapter gives a compact description of the initial
commissioning of the JC-120MC and covers the following functions:
 Creation and execution of a program which increments a variable.
This chapter covers the following topics on initial commissioning of the
peripheral module JX3-DIO16 connected with the JC-120MC:
 Configuring the hardware of a JX3 station and installing it

Configuring the software in JetSym
 Creating and executing a program to set and reset output 9 of the
peripheral module JX3-DIO16
For initial commissioning the JC-120MC, the following prerequisites must be
fulfilled:
 The controller is connected to a PC via Ethernet.
 The programming tool JetSym 5.2.1 or higher is installed on the PC.
 Mode selector S11 is in STOP position.
Topic Page
Preparatory work for initial commissioning ................................................. 126
Initial commissioning of a JC-120MC ......................................................... 127
Configuring error states .............................................................................. 129
Configuration in JetSym ............................................................................. 130
Purpose of this chapter
Prerequisites
Contents