Jetter JC-120MC, Руководство пользователя

Страница: 144 / 634

144 Jetter AG
6 File system
Assigning locks
In the configuration file /System/flashdisklock.ini you assign locks to
directories located on the flash disk. Only users with the corresponding key
are allowed to read or write (delete) files and subdirectories located in these
directories.
If you want to use names for the locks, you must make them known to the
device beforehand. Therefore, set up the names first Setting up names for
keys/locks (see page 146).
To assign a lock to a directory, proceed as follows:
Step Action
1
Establish an FTP connection to the device; when doing so, log in with
administrator rights.
2 Open the file /System/flashdisklock.ini .
3
Adjust the file entries.
4 Save the changed file to the device.
5
Reboot the device.
Result: A lock is assigned to this directory.
This configuration file is a text file containing one section.

In this section values can be set which are then used by the file system.
 Specify each directory with its lock number in an individual line.

You can insert blank lines as required.
 The following characters precede a comment line: "!", "#" or ";".
The section is named [LOCKS] . Here, locks are assigned to directories in
accordance with the following rule:
Directory=Lock
Example:
[LOCKS]
test1=0
test1/sub1=2
test1/sub2=5
test2=userlock2
Introduction
Prerequisites
Installing the lock
Structure of the
configuration file
Section