Jetter JC-120MC, Руководство пользователя

Страница: 597 / 634

Jetter AG 597
JC-120MC OS update
Operating system update from within the application program
The file functions included in the STX language scope let you transfer an
OS ile to a JX module on the JX2 or JX3 system bus of the controller.

An OS file for the JX module is available in the file system of the controller.

The operating system of the controller and the application program must be
running.
 The controller has initialized both the JX2 and JX3 system bus with the
connected JX modules without errors.
Note:
Make sure the controller and the JX modules remain energized.
To update the OS of a JX module, proceed as follows:
Step Action
1 Copy the OS file to a file of any name and of the extension *.os in the
OS file of the module.
Example:
/System/JX2-Slave02/OS/system.os or
/System/JX3-Module05/OS/Anything.os
2 If ... ... then ...
... you wish to update further JX3
modules, ...
... proceed with step 1
... you do not wish to update any
other JX3 modules, ...
... reboot the controller to launch the
new operating system.
Var
SourceName: String [ 100 ];
DestinationName: String [ 100 ];
UpdateIt: Bool;
End_Var ;
Introduction
Prerequisites
Updating the OS
JetSym STX program