Jetter JC-120MC, Руководство пользователя

Страница: 273 / 634

Jetter AG 273
JC-120MC Programming
Automatic termination of connections
If the maximum number of simultaneously established connections has been
reached, any further connections cannot be established. If further connect
requests are made, the user can set the response by the JetIP/TCP server
and of the STX Debug server. There are the following possibilities:

Reject new connection.
 Terminate one existing connection and establish the new one.

Terminate all existing connections and establish the new one.
By default, the server terminates the connection with the longest time of
inactivity.
If the server is not to terminate any of the existing connections, proceed as
follows:
Step Action
1
Enter value 0 into MR 1.
If the server is to terminate the connection that has been inactive the longest
time, proceed as follows:
Step Action
1
Enter value -1 into MR 2.
2 Enter value 1 into MR 1.
If the server is to terminate a connection after a set minimum time of inactivity,
proceed as follows:
Step Action
1
Enter the minimum time [ms] into MR 2.
2 Enter value 1 into MR 1.
If the set minimum value has not been exceeded yet, the server rejects the
new connection.
If the server is to terminate any of the existing connections, proceed as
follows:
Step Action
1
Enter value 2 into MR -1.
2 Enter value 1 into MR 2.
Introduction
Default setting
No automatic
termination of
connections
Terminating the
connection with the
longest time of inactivity
Terminating the
connection when the set
minimum time has
expired
Terminating any
connection