Jetter JC-120MC, Руководство пользователя

Страница: 571 / 634

Jetter AG 571
JC-120MC Automatic copying of controller data
Command sections
In these sections you can specify commands which are then executed by the
AutoCopy function.
[COMMAND_1]
Command = DirCreate
Path = /Homepage
ErrorAsWarning = 1
[COMMAND_2]
Command = FileCopy
Source = /SD/Index.htm
Destination = /Homepage/index.htm
[COMMAND_3]
Command = FtpConnect
ServerAddr = 192.168.123.45
UserName = admin
Password = admin
The names of the sections consist of the COMMAND_ string followed by a
value. The value is between one and the value of the
CommandCount
entry
from section [OPTIONS].
The AutoCopy function processes the commands in order of their section
names:
 Starting with the command under section [COMMAND_1]

Ending with the command under the section with the value of entry
CommandCount from section [OPTIONS]

Each command section may only contain one command. Thus, you have to
create an individual section for each command.
When an error occurs while a command is being processed, the controller
makes a corresponding entry in the log file. For each command the user can
set, whether the controller is to enter the error into the log file as Error or as
Warning . Make this setting by the optional parameter ErrorAsWarning .
ErrorAsWarning Entry into the log file
Parameter does not exist Error
ErrorAsWarning = 0 Error
ErrorAsWarning = 1 Warning
Introduction
Example
Section names
Processing commands
Troubleshooting