Jetter JC-120MC, Руководство пользователя

Страница: 563 / 634

Jetter AG 563
JC-120MC Automatic copying of controller data
For automatic copying of controller data, the following prerequisites must be
fulfilled:

The programmer is familiar with the file system.
 The programmer must have basic knowledge in the area of FTP
application.
This is an example of a configuration file
config.ini
with an entry AutoCopyIni .
;<Productname> System Configuration
;Copyright (c) 2009 by Jetter AG, Ludwigsburg, Germany
[IP]
Address = 192.168. 10.209
SubnetMask = 255.255.255. 0
DefGateway = 0. 0. 0. 0
DNSServer = 192.168. 10.244
[HOSTNAME]
SuffixType = 0
Name = JetControl120MC
[PORTS]
JetIPBase = 50000
JVMDebug = 52000
[FILES]
AutoCopyIni = /SD/project_name/autocopy.ini

The AutoCopy function only makes sense, if the data to be copied have
been stored to the SD card. This means that the root directory is /SD/ .
Since operating system version OS Neue AutoCopy-Funktion of JC-120MC
the following applies:
 The file autocopy.ini can be stored to any subdirectory.
 Instead of autocopy.ini , you can name the file arbitrarily.
In this description, Complete Name means the name of the file or directory
including the complete path.
Topic Page
Operating principle ..................................................................................... 564
autocopy.ini - Structure ............................................................................... 569
Log file ........................................................................................................ 582
Data files ..................................................................................................... 584
Prerequisites
config.ini - Example
AutoCopyIni - Note
Designation
Contents