Jetter JC-120MC, Руководство пользователя

Страница: 249 / 634

Jetter AG 249
JC-120MC Programming
Bit 1 Error in connection with a publication
1 = An error has occurred in a publication.
Bit 7 Publication is functioning
0 = If a publication fails, bit 7 is reset.
1 = The publications are functioning.
Module register properties
Type of access Read
Command registers of all publications
Via MR 255001, you transmit commands to all publications.
Commands
102
Reboot all publishers
105 Stop all publishers
110 Acknowledge error
The following registers let you select a publication:
 The index is for selecting publications.
• If the publication exists, R 255x11 shows its ID.
• If the publication does not exist, R 255x11 shows value -1 .

In this case, enter the ID of the publication into R 255x11.
• If the publication exists, the content of R 255x11 is kept.
• If the publication does not exist, R 255x11 shows value -1 .
Register Name Description
255x10
Index Index of the publications:
0: Selects the first publication
1: Selects the next publication
2: etc.
255x11 ID The ID of the publication is entered
The following registers show the configuration of a publication, which you
have selected via R 255x10 and R 255x11.
Register Name Description
255x20
Status Bit 0: Publication transmitted
255x21
Mode 0: Cyclic
1: Upon request
Publisher command
Selecting a publication
Configuring a
publication