Jetter JC-120MC, Руководство пользователя

Страница: 600 / 634

600 Jetter AG
13 Application program
Application program - Default path
When uploading the application program from JetSym to the controller, this
program is stored as a file to the internal flash disk. The device enters the path
and file name into the file /app/start.ini .
In the directory /app , JetSym, by default, creates a subdirectory and assigns
the project name to it. Then, JetSym stores the application program to this
subdirectory assigning the extension *.es3 to it. The path and file names are
always converted into lower case letters.
This file is a text file with one section holding two entries:
Element Description
[Startup] Section name
Project Path to the application program file. This path is
relative to /app .
Program
Name of the application program file
Example:
[Startup]
Project = test_program
Program = test_program.es3
The application program is loaded from the file
/app/test_program/test_program.es3 .

Storing the application program to the SD card (see page 601)
Introduction
Path and file name
/app/start.ini - Structure
Related topics