Jetter JC-120MC, Руководство пользователя

Страница: 483 / 634

Jetter AG 483
JC-120MC Programming
Receiving values
Values are received by reading characters from registers MR 15 through
MR 18 Receiving buffer registers .
This guide proceeds from the assumption that the user-programmable serial
interface has been configured.
To receive values via user-programmable serial interface proceed as follows:
Step Action
1
Check the filling level of the receive buffer to make sure that it contains at
least 2 or 4 characters.
2 Read the values from Receiving buffer registers MR 15 through MR 18.
Result: The characters are read from the receiving buffer.
Introduction
Prerequisites
Receiving values