Jetter JC-120MC, Руководство пользователя

Страница: 479 / 634

Jetter AG 479
JC-120MC Programming
Sending characters
A character is sent by entering it into the register Transmit buffer .
This guide proceeds from the assumption that the user-programmable serial
interface has been configured.
To send characters via user-programmable serial interface proceed as follows:
Step Action
1
Check the transmit buffer filling level, whether there is enough space in
the transmit buffer.
2
If there is no space in the transmit buffer, wait, until there is enough space.
3 Enter the character to be sent into register
Transmit buffer
.
Result: The character is written into the transmit buffer and will be sent from
there.
Introduction
Prerequisites
Sending characters