1
PID-4CH-SSR Multi-Loop Controller Instruction Manual
1. Features:
1.1. 4 channels of temperature controls up to 4 channels in a compact 1/4 DIN size.
4 kinds of combinations of temperature set value, PID constant, alarm set value, etc.
1.1.Input Sensor Types
Thermocouple (temperature input): K, J, T, E, S
Resistance thermometer (temperature input): Pt100, CU50
1.2.Control Outputs
A control output can be a relay output, voltage output (for driving SSR), or current output, depending on
the model.
1.3.Adjusting PID Constants
Can be easily set the optimum PID constants by performing AT (auto-tuning) with the limit cycle method.
1.4.Standard Alarms
Can be output an alarm when the deviation, process value, set point, or manipulated value reaches a
specified value.
1.5 Sampling Time: 2 sec
1.6.Use this controller within the following allowable range:
Allowable ambient temperature: −0 to +55 °C
Allowable ambient humidity: 5 to 85 % RH.
2. Dimensions:
h×w×d(Unit: mm) 96×96×112 Panel cutout 92×92
3. Parts Description:
1 ALM:
lamp Lights when Event occurs
2 Output lamp:
Lights when output is turned on
3 Channel key:
You can press ‘CH1~4’ for 3 seconds to enter into
corresponding channel menu.
4 PV display:
Displays Measured value (PV)
5
Up key:
Increase numerals.
6 Down key:
Decrease numerals
7Shift key:
Shift digits when settings are changed.
8 Set (SET) key:
Used for parameter calling up and set
value registration.
4. Terminal configuration for Measured input and Output:
