Jetter JC-120MC, Руководство пользователя

Страница: 550 / 634

550 Jetter AG
10 Programming
CAN-ID mask
The CAN-ID mask can be used to configure which bits of a received CAN-ID
are compared with the configured CAN-ID of the message box.
Module register properties
Values Bit = 0 Bit is not compared with CAN-ID
Bit = 1 Bit is compared with CAN-ID
Takes effect When the CAN-Prim interface is enabled
Received CAN-ID
In the case of an inbox, the CAN-IDs of received CAN messages are entered
here.
Module register properties
Type of access Read
Values In the case of 11-bit CAN-IDs 0 ... 0x7FF
In the case of 29-bit CAN-IDs 0 ... 0x1FFFFFFF
Takes effect When the CAN-Prim interface is enabled
Number of data bytes
In the case of an outbox, a CAN message is sent with this number of data
bytes.
In the case of an inbox, the number of received data bytes is entered.
Module register properties
Values Number of data bytes: 0 ... 8
Takes effect When the CAN-Prim interface is enabled
R 200 message
box number *20
R 200 message
box number *20
R 200 message
box number *20