Jetter JC-120MC, Руководство пользователя

Страница: 480 / 634

480 Jetter AG
10 Programming
Sending texts
An easy way to send texts via the user-programmable serial interface is
redirecting the instructions DisplayText() and DisplayText2() to
Device 9
.
This guide proceeds from the assumption that the following conditions are
met:
 The user-programmable serial interface is configured.

The user is familiar with the options of the instructions DisplayText()
and DisplayText2() (refer to the online help which comes with JetSym).
When redirecting the instructions DisplayText() and DipslayText2() to
the user-programmable serial interface the following restrictions apply:
 The cursor position will not be evaluated.

The characters for "Delete Screen" and "Delete to End of Line" are of no
special significance and will be output without any changes.
To send texts via user-programmable serial interface proceed as follows:
Step Action
1 Use the instruction DisplayText() or DisplayText2() .
2 Specify Device 9 .
Result: The task waits at this instruction until all characters have been
entered into the transmit buffer.
Introduction
Prerequisites
Restrictions
Sending Texts